Lab numbers, not guesswork
Sometimes you can't see the problem and you just want to know what the lab says. Call the line and we match you with an independent, licensed and insured professional in Due West who pulls calibrated air samples, takes an outdoor control and ships everything under chain of custody.
ESS Mold Inspection is a free referral service. Samples are collected by independent local professionals and analyzed by third-party labs.
How sampling works
At its core, mold testing is about capturing spores and letting a lab count them. The most common air method uses a spore-trap cassette on a calibrated pump. A typical run is 15 liters per minute for 5 minutes, so 75 liters of air pass over an adhesive strip inside the cassette. The lab counts and identifies what landed on that strip under a microscope, then converts the count to spores per cubic meter of air.
A single indoor count tells you very little without a comparison. Outdoor air always carries spores, which is why a control sample gets taken outside during the same visit. If indoor levels run well above outdoor levels, or the indoor sample is dominated by types like Stachybotrys or Chaetomium that rarely show up outside in any quantity, that points to an indoor source. There are no federal numeric limits for indoor spores, which is exactly why the outdoor comparison carries so much weight.
When there's a visible spot and you want it identified, surface samples come in. A tape-lift presses clear adhesive tape onto the growth, a swab works on rough or curved surfaces, and a bulk sample is a cut piece of drywall, carpet or insulation sent whole. For suspected growth inside a wall, some pros take a wall-cavity air sample through a small port. Folks in Due West usually call for testing to document conditions for a sale, a lease dispute or a clearance after remediation.
What separates good sampling
Lab results are only as reliable as the way the samples were collected, handled and shipped.
The professionals the line connects you with carry liability insurance and carry the state assessor credential if your state licenses mold sampling. Because they aren't selling the remediation, they have no reason to steer results.
When a remediator is waiting on clearance before pulling the plastic, a slow tester costs you days. Tell the dispatcher it's a clearance or a closing, and the call is routed to a Due West pro who can sample soon; same-day is common.
Expect a visit fee and a per-sample cost, with rush lab processing billed on top. The written quote lists the expected sample count and the lab fees so the bill doesn't surprise you.
Look for a high-volume air pump with a rotameter calibration check before and after each run, sealed spore-trap cassettes, tape-lift slides, sterile swabs and sealed bags for bulk samples. Results are only defensible with an AIHA-LAP accredited lab and a signed chain-of-custody form tracking each sample from collection to analysis.
Sampling methods
The right test depends on what decision you're trying to make, so be ready to say whether it's for a sale, a lease or a clearance.
This is the workhorse test. Each indoor cassette is paired with an outdoor control, and the lab report lists every spore type with its count per cubic meter.
When there's a visible spot, a tape-lift or swab tells you whether it's actually mold and which genus it is, and a bulk sample works for porous material like carpet backing or insulation.
A small hole and a short sample run can show whether a closed stud bay is full of spores. Results are read differently from room air, since cavities are closed spaces.
ERMI uses DNA analysis on settled dust to identify 36 mold species and produce an index score. Treat it as a screen: it shows history in the dust, not what's airborne today, so most pros pair it with air samples.
Clearance happens while containment is still up: inside and outdoor air samples, plus surface samples if needed, document that the cleanup worked. Sellers and landlords often need that lab report for real estate disclosures or lease records.
Call and get matched with an independent, licensed sampling professional in Due West who works with accredited labs.
How it works
The process is simple, and the quote comes before the pump comes out.
Expect questions about the purpose of the test, the areas of concern and any deadline you're working against.
An independent sampling pro in Due West confirms the appointment, and urgent clearance requests are prioritized. Avoid running air purifiers or cleaning heavily right before the visit, since that skews the air sample.
The pro confirms the sample plan, calibrates the pump, pulls the outdoor control and the indoor samples, and labels each cassette. Extra cassettes are only added once you approve the price.
Samples ship to an AIHA-LAP accredited lab under chain of custody, and results usually return in 24 to 72 hours with rush options.
From the dispatch log
These situations come through the line all the time.
A seller had a basement remediated and the buyer's agent asked for proof the job was finished. The sampling pro pulled air samples inside the work area and outdoors while containment was still up, plus a tape-lift from the cleaned framing. The accredited lab showed indoor counts below outdoor levels with a similar spore mix.
Outcome: The seller attached the lab report and chain-of-custody form to the disclosure, and the sale moved forward.
After a leaking window wet the bedroom carpet, a parent wanted lab data before letting the child sleep there again. The pro took bedroom and hallway air samples plus an outdoor control. The bedroom showed elevated Penicillium and Aspergillus spores compared to outdoors.
Outcome: The results supported replacing the carpet pad, and the parent shared the report with the child's pediatrician.
A homeowner left an open settle plate on the kitchen counter for an hour, saw fuzzy growth days later and called in a panic. The sampling pro explained that spores are always present in air, so a settle plate almost always grows something. Calibrated air samples with an outdoor control showed indoor counts well below outdoor counts.
Outcome: Real lab data replaced the dish result, and the homeowner skipped an unnecessary remediation estimate.
A renter and a property manager disagreed about whether a closet smell needed attention. The tenant called for independent testing. The pro took a wall-cavity sample behind the closet, a room air sample and an outdoor control, all sent under chain of custody.
Outcome: The cavity sample showed high Stachybotrys counts, giving both sides lab data to work from.
These are composite examples based on common calls to the line, not individual customer reviews.
Questions
One call connects you with a local sampling pro in Due West who works with accredited labs.
Call +1-844-326-4757Petri dish settle plates aren't reliable for deciding anything. Mold spores float in every home and every backyard, so leaving a dish open almost always grows something, and the kit can't tell you how much is in the air compared to outside. A calibrated pump sample with an outdoor control is what labs and real estate agents in Due West actually accept.
Standard turnaround at most accredited labs is 24 to 72 hours after the lab receives the samples. Rush and same-day processing are usually available for an added fee, which helps when a closing or a containment teardown is waiting.
There's no federal numeric limit for indoor mold spores, so no single number makes a home safe or unsafe. Results are read against the outdoor baseline and by spore type, not against a fixed threshold. People with asthma, allergies or immune concerns should go over the results with their doctor.
It sets the baseline everything else is measured against. Because spore levels outside swing with rain, wind and season, the pro samples outdoors during the visit to capture that day's normal. Indoor air that exceeds the outdoor count or shows a different mix of species points to growth inside.
To a degree, yes. Spore-trap and tape-lift analysis under a microscope usually identifies mold to the genus level, such as Aspergillus, Penicillium, Cladosporium or Stachybotrys, but some spores look nearly identical and get grouped. For species, labs need culture or DNA analysis, which adds time and cost.
Clearance testing confirms a remediation worked, using air and sometimes surface samples taken inside containment before it's removed, compared to an outdoor control. It's worth it when you need documentation for a sale, a lease or insurance, or when someone in the house is sensitive. Use an independent tester, not the company that did the cleanup.
Service area
The line routes sampling calls across Due West, from single-family homes and rentals to condos and small offices. You get matched with a local sampling pro who uses accredited labs and isn't connected to any remediation contract.
If you need clearance, call once the remediator finishes, before containment comes down. For real estate or lease documentation, mention the deadline so rush lab options are discussed up front.
